SmokTech ZMAX V2 Variable Wattage/Voltage - Stainless Steel (satin finish)

The ZMAX is an advanced microprocessor equipped personal vapouriser.

It comes packed with all the features found in the VMAX and more...

In this latest version SmokTech have introduced the ability to control both the level of wattage (power) as well as that of the voltage fed onto the attachment connector.

This function is particularly useful when using different attachments at different levels of resistance. Once setting the desired level of power it would no longer be necessary to dial in different settings when changing attachments at varying levels of resistance, unless required by the user. 

In addition to that, the ZMAX allows greater flexibility when it comes to choice of batteries. The device supports using a single IMR18650 battery as well as stacked IMR18350's.

By default ZMAX comes with an IMR18650-compatible battery cap. To use 2 X IMR18350's an additional cap is required (optional).

Features:

• Voltage adjusments: 3.0v - 6.0v in 0.1v increments
• Power adjustments: 3.0w - 15.0w in 0.5w  increments
• Built in 3 digit blue LED display
• Supports single IMR18650 (default) or 2 X IMR18350's (with optional cap)
• Hybrid 510/eGo Connector
• 4A current limit
• 8 Menu Options with AVG/RMS Function
• Power on/off
• Battery Check
• Atomizer ohm check
• Cutoff protection
• Short circuit protection
• Reverse polarity protection
• Over discharge protection
• Made of stainless steel

Menu:

2.Ud --- Voltage down               
3.So --- Standby on/off               
4.Uc --- Voltage check of battery               
5.Ds --- Display change               
   Do --- Display cartomizer/atomizer output voltage               
   Du --- Display battery output voltage               
   DR---Display resistance               
6.Lo --- Led on/off               
7.Up --- Voltage/Wattage               
   Po --- Constant wattage operation               
   Uo --- Constant voltage operation

8. --- AVG/RMS               
 

Error codes:

LOR --- Lower resistance indication; If the resistance is below 1.2ohm, the display will show "Low Load".

LOU --- Lower voltage indication:

• When using a single 18650 battery and voltage is below 3.4v the display will show "Low Voltage"
• When using stacked 18350 batteries and voltage is below 6.4v the display will show "Low Voltage"

WSC --- Short circuit indication. If cartomizer/atomizer output port short-circuit, the display will show "Warning Short Circuit".

Low Battery Indicator --- When the battery power is depleted the activation button will flash indicating that you need to recharge/replace.

EcigModShop recommends using only high quality, high drain- safe chemistry batteries such as the AW IMR.

AW IMR18650 2000mAh, AW IMR18650 1600mAh, 2 X AW IMR18350 (with optional cap) all fit and function great.

Downloadable user manual (can save via Google Docs: File->Download)